NEW_GUTTERMAKER

BACK TO NEW MACHINERY PAGE

BATAVIA MACHINERY

P. 775-746-2433 / FX. 775-746-2499
EMAIL: ebatavia@prodigy.net

SUPER DUTY 48"GANG SLITTER
MODEL 3350 / 3353
CALL FOR QUOTE &
PRICES: 775-746-2433

THRIFTY 48"GANG SLITTER
MODEL 3351
CALL FOR QUOTE &
PRICES: 775-746-2433

INDUSTRIAL GANG SLITTER
MODEL 448 - 672
CALL FOR QUOTE &
PRICES: 775-746-2433

SINGLE WHEEL SLITTER
MODEL 3354
CALL FOR QUOTE &
PRICES: 775-746-2433

CALL US TODAY AT P. 775-746-2433

BACK TO NEW MACHINERY PAGE



The Thrifty 48” Sheet Slitter offers an economical and profitable means of processing for the popular 48” wide sheets. It has great acceptance with both sheet metal contractors and manufactures processing light gauge metal. With a capacity of 49” and one (1) cut of 16 gauge, this slitter can be used for a range of activities. Its patented design and many features make it a most profitable investment. Standard features include: 3” diameter cold-roll turned, ground and polished shafts mounted in dual wall ball bearings Bearing are lubricated for life series Gauge mounting on each side permits left or right hand operation End frames are aluminum-magnesium alloy The exclusive GARY Torsion Tube Assembly makes it a lightweight rugged unit Heavy gauge steel table with “T” bar reinforcement Slitter knives are proven GARY “Quickset” design manufactured from toolsteel Knives are “reversible”, intervals between sharpening is double that of a single edge knives 2 sets of standard 3” x 5” x ľ” wide high-carbon tooling is included 40 FPM standard operating speed Heavy duty roller chain drive powered by 1/3 HP gearmotor Standard 110 volt with grounded plug

The Superduty 48” Sheet Slitters offers a new dimension to multi-cutting equipment. To serve the processor requiring a wider range of capacities, the Superduty has added horsepower and a superior cutting quality. Model 3350 is equipped with a ľ HP motor …to supply the torque required to cut a wide range of material thickness (16 gauge through 30 gauge) at operating speeds of up to 100 FPM. The aluminum – magnesium twist eliminators permit a knife arrangement for cutting strips as narrow as 1˝” in width. Model 3353: This is the Superduty Slitter with a 3- phase, 1 HP motor with the same cut capacities and speed as the Model 3350. Standard features include: 3” diameter cold-roll turned, ground and polished shafts mounted in dual wall ball bearings Bearing are lubricated for life series Gauge mounting on each side permits left or right hand operation End frames are aluminum-magnesium alloy The exclusive GARY Torsion Tube Assembly makes it a lightweight rugged unit Heavy gauge steel table with “T” bar reinforcement Slitter knives are proven GARY “Quickset” design manufactured from toolsteel Knives are “reversible”, intervals between sharpening is double that of a single edge knives 2 sets of standard 3” x 5” x ľ” wide high-carbon tooling is included 60 FPM standard operating speed Heavy duty roller chain drive powered by ľ HP gearmotor with thermal overload Transformer steps down control voltage to 110 for operator safety Stripper fingers provide for a twist free cut Standard 110/220 V -1 Ph. on Model 3350; 220/440 V – 3 Ph on Model 3353

“Like Having A Portable Squaring Shear” Designed for on-site use yet equally at home in the industrial environment, this rugged rotary shear is something no one cutting sheet stock should be without. The slitter is capable of shearing strips anywhere from 1” to 24” wide from any size parent sheet with no limitation on length. Simple operation: Move pointer to the desired width of cut, lock in place with hand knobs, switch on and feed material - no tools required Designed for 16ga. mild steel or lighter, will also cut aluminum, stainless, and a variety of non-metallic materials with ease. Standard features include: Die-set type gauge mounting that insures easy setting and consistent squareness Gauge mounting rods are extended to provide convenient carrying handles Gauge is easily removed for machine transport and re-installed with no resquaring Slitter knives are proven GARY “Quickset” design manufactured from toolsteel Knives are outboard mounted for easy access Knives are “reversible”, intervals between sharpening is double that of a single edge knives “Adiprene” stripper rings are non-marking and serve to hold the material flat reducing twist Drive shafts mounted with precision relubricable sealed ball bearings Dual bearings mounted at knife end to minimize deflection and increase knife life Heavy duty roller chain drive powered by 1/3 HP gearmotor ** Standard 110 volt with grounded plug. Requires less than 6 amps